Valcom ONE-WAY PAGING SYSTEM Manuel d'utilisateur télécharger pdf (Page 4)

Overview

The VE6023 Telephone Page Server extends the functionality of an IP phone system allowing it to

integrate seamlessly with an overhead paging system. The VE6023 allows pages from other Valcom

devices to play on either Cisco or Avaya IP desk phones, essentially turning those phones in to

additional IP speakers.

System Requirements for Managed VoIP Products

• Network Hardware Requirements:

◦ 10/100 Mbps Ethernet network

• Bandwidth Requirements:

◦ 86 kbps per active One Way Page

◦ 172 kbps per active Two Way Call

• TCP Requirements:

◦ Port 21 for FTP access

◦ Port 23 for Telnet access

◦ Port 80 for Web based access

• UDP Requirements:

◦ 3 Bi-directional Ports (Factory default 4097, 4098, 4099)

• Multicast Requirements:

◦ IGMPv3 enabled network

◦ 3 Multicast addresses (Factory default 239.1.1.2, 239.1.1.3, 239.1.1.4)

◦ Additional Multicast ports for paging (Factory default 239.1.1.10)

• Other Suggested settings:

◦ Separate VLAN for optimal performance

◦ Valcom device for sourcing pages

Initial Setup

Before the VE6023 can discover the IP phones on the network, the phone system must be configured to

allow the VE6023 access. Follow the instructions for the appropriate phone server before configuring

the VE6023.

VE6023 Telephone Page Server - User Manual Page 4

1 2 3 4 5 6 7 8 9 ... 18 19

Pas de commentaire

Valcom ONE-WAY PAGING SYSTEM Manuel d'utilisateur Page 4